Hello, welcome to visit KUS website!

Company Profile

Conductivity Sensor


Fuel cell engines have high requirements on the conductivity of coolant. This is because impurities will continue to increase during the circulation process of the coolant,causing its conductivity to continue to increase and the insulation performance of the system to decrease. To ensure safety, a conductivity sensor is required to monitor the conductivity of the coolant, and the conductivity is measured using the resistance measurement method based on the principle of electrolytic conduction. Details Consulting

Contact Us

  • * Call:
  • invisibility?

  • Close
  • Measuring Range:0.01-20μS/cm
  • Resolution:0.01μS/cm

  • Accuracy:±1.5%FS
  • Operating voltage:12V/24V(9-32VDC)

  • Working current :<50mA
  • Over-voltage protection:36V

  • Working Temperature:-40-95°C
  • Work pressure:<0.6MPa

  • Communication form :CAN
  • Protection level :IP67

  • 1.Product application: Liquid cooling systems for hydrogen fuel cell vehicles, super charging piles, and super computing power, etc

  • 2.Product type: Conductivity sensor (dual-electrode conductivity measurement)

  • 3.Real-time feedback: Outputs an alarm signal when the measured value exceeds the set value

  • 4.Fault diagnosis: equipped with intelligent self-diag-nosis function

  • 5. Fluid contact materials: Fluid contact parts are corrosion-resistant

  • Service Hotline

    +86 (0)769 83533290