Conductivity Sensor

Fuel cell engines have high requirements on the conductivity of coolant. This is because impurities will continue to increase during the circulation process of the coolant,causing its conductivity to continue to increase and the insulation performance of the system to decrease. To ensure safety, a conductivity sensor is required to monitor the conductivity of the coolant, and the conductivity is measured using the resistance measurement method based on the principle of electrolytic conduction. Details Consulting

Product Descriptions
Function Descriptions
Product Recommendations

Measuring Range：0.01-20μS/cm

Resolution：0.01μS/cm

Accuracy:±1.5%FS

Operating voltage：12V/24V(9-32VDC)

Working current ：＜50mA

Over-voltage protection：36V

Working Temperature：-40-95°C

Work pressure：＜0.6MPa

Communication form :CAN

Protection level :IP67

1.Product application: Wide voltage range, compatible with passenger cars and commercial vehicles

2.Product type: Conductivity sensor (dual-electrode conductivity measurement)

3.Real-time feedback: Outputs an alarm signal when the measured value exceeds the set value

4.Fault diagnosis: equipped with intelligent self-diag-nosis function

5. Fluid contact materials: Fluid contact parts are corrosion-resistant

Products and Solutions